Zhejiang Momali Sanitary Utensils Co.,Ltd
+86-577-85237018

Products

News
Home > News > Content

How To Remove The Shower Faucet

  How to remove the shower faucet

  First, you need to use these tools to deal with push-type faucet: screwdriver, osmotic oil, carp pliers or wrench, to replace the pad!

  Step 1: Close the water supply and remove the small screws above or behind the faucet handle to remove the handle that is secured to the faucet body. shower faucet Some screws are hidden under metal buttons, plastic buttons or plastic sheets, and these buttons or plastic pieces are caught or screwed into the handle. As long as you open the button, you will see the handle screw on the top. If necessary, use some osmotic lubricants like the WD-40 to loosen the screws.

  Step 2: Remove the handle and see the faucet parts. shower faucet Use a large carp pliers or an adjustable wrench to remove the packing nuts and be careful not to leave scratches on the metal. Rotate the spool or shaft in the same direction as when you turn on the faucet to turn them off.

  Step 3: Remove the screws that hold the washers. If necessary, use osmotic lubricants to loosen the screws. Check the screws and spool, shower faucet if there is damage to replace the new one.

  Step 4: Replace the old washer with a completely identical new washer. The new washers, which are almost exactly the same as the old washers, shower faucet can make the faucet no longer dripping. You should also note that the old washer has a bevel or flat and is replaced with the same new washer. Only for cold water design of the gasket in the hot water flow will be violent expansion to plug the outlet, making the hot water flow slow. Some washers can work in hot and cold water, but you have to make sure you buy the gasket for replacement and the original is exactly the same.

  Step 5: Fix the new washer to the spool, shower faucet and then reassemble the components in the faucet. Rotate the spool clockwise. When the spool is in place, replace the packing nut. Be careful not to let the wrench leave scratches on the metal.

  Step 6: Reinstall the handle and replace the button or disc. Reopen water supply and check for leaks.


Feedback
Feedback
Contact Us
Address: Haicheng Industrial Zone Longwan District, Wenzhou, China
Tel: +86-577-85237018
Fax: 86-577-85223555
E-mail:ab@momali.net
Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML