Zhejiang Momali Sanitary Utensils Co.,Ltd


Home > News > Content

Shower Faucet Cleaning And Maintenance Skills

When you have carefully selected after the tap installed with a period of time will find it becomes "dirty" seems to be different from when you first see it, so in this Weapon, so you choose it as early as see.

Cause Analysis:

1, the faucet surface is easy to residual water stains, water stains will be formed after the very ugly spots;

2. After installation, improper cleaning caused by surface abrasion and plating surface adhesion of the decoration of the glue or other decorative materials residue;

3, after a period of time is not clean, even if the faucet and then upscale, will become eclipsed, so we must always clean and maintenance of the faucet.

4, the use of the process is "rude", very "violent" in the good products can not stand toss.

First, the faucet and shower head of the simple cleaning skills

Faucets and shower shower cleaning is not complicated, as long as the regular maintenance, can be as long as new.

1. If it is a copper faucet, to clean the surface of the plating, you can use water and detergent scrub, you can also directly with some strong oil decontamination detergent cleaning, can also use metal wax to wipe. (Need to be careful not to use a corrosive liquid wipe the faucet) (shower is also the case)

2. Water faucet and shower on the scale, rust, etc., just use a damp cloth or sponge dipped in a little special cleaning agent to wipe the surface, and then wipe with a clean cloth or rinse with water can be.

3. With a soft toothbrush dipped in toothpaste or wiped with toothpaste dipped in toothpaste gently, you can remove the scale, oil, so that the faucet surface clean and bright.

4. Many people clean the faucet when only the surface of the faucet, but in fact the faucet is more important. If the faucet is less water or bifurcated, it may be caused by a bubbler jam. Can be removed from the bubbler, soaked with vinegar, with a small brush or other tools to clean debris, and then change the new gasket can be re-installed twist.

5. Sprinkler top spray and hand spray If you encounter a small amount of water is likely to be the main valve plug, then the main valve can be removed from the water parts of the remaining items rinse clean, put on with a steel mesh pad installed , Can also be removed by the top spray nozzle to observe whether there are impurities in the joints lead to clogging.

Second, clean precautions

Although the faucet and shower chrome plating layer claims corrosion resistance does not rust, but the incorrect cleaning method will still cause abnormal wear.

1. Do not use steel balls and other hard objects to wipe the surface plating, because the steel ball is very hard, easy to scrape its surface.

2. It is best to use a neutral cleaning agent for cleaning, acid and alkali strong cleaning agent does not apply to the faucet clean.

3. After the faucet is cleaned, dry the surface with the dry hairless towel, so as to avoid residual water stains.

4. Before installing the faucet and shower head, place the reserved water pipe once again, and remove the memory debris until it is ready to install the product.

Third, the use of taps skills

1. Switch taps do not force too much, homeopathy can be gently turn. Even the traditional faucet, do not need a lot of strength to die. In particular, do not use the handle as a handrail to support or use.

2. Large shower of the shower hose should be maintained in a natural stretch state, do not use it when not in the faucet. At the same time, when using or not, pay attention to the hose and the valve body joints do not form dead ends, so as not to break or damage the hose.

3. In the case of water pressure of not less than 0.02mpa (ie 0.2kgf / cm2), after a period of time, if the water is reduced, or even the phenomenon of water heater flameout, you can light in the faucet Light down the screen cover, remove impurities, generally can be restored as ever.

4. Please have experienced and qualified professionals to install the installation. Installation, the faucet do not bump with the hard objects, do not cement, glue and other residues on the surface, so as not to damage the surface coating luster. Pay attention to the debris in the pipeline before the faucet installed.

Contact Us
Address: Haicheng Industrial Zone Longwan District, Wenzhou, China
Tel: +86-577-85237018
Fax: 86-577-85223555
Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML